The advantages of the software version

The software version is one of the three versions of our HP0-Y37 actual exam, which is designed by the experts from our company. The functions of the software version are very special. For example, the software version can simulate the real exam environment. If you buy our HP0-Y37 study questions, you can enjoy the similar real exam environment. In addition, the software version of our study materials is not limited to the number of the computer. So do not hesitate and buy our HP0-Y37 preparation exam: Migrating &Troubleshooting Enterprise Networks, you will benefit a lot from our products.

Help you make your own learning plan

As is known to us, a suitable learning plan is very important for all people. For the sake of more competitive, it is very necessary for you to make a learning plan. We believe that our HP0-Y37 actual exam will help you make a good learning plan. You can have a model test in limited time by our study materials, if you finish the model test, our system will generate a report according to your performance. You can know what knowledge points you do not master. By the report from our HP0-Y37 study questions. Then it will be very easy for you to make your own learning plan. We believe that the learning plan based on the report of our HP0-Y37 preparation exam: Migrating &Troubleshooting Enterprise Networks will be very useful for you. So if you buy our products, it will help you pass your exam and get the certification in a short time, and you will find that our study materials are good value for money.

After-sales service guarantee

Our HP0-Y37 preparation exam: Migrating &Troubleshooting Enterprise Networks can provide all customers with the After-sales service guarantee. The After-sales service guarantee is mainly reflected in to aspects. On the one hand, we can promise that our HP0-Y37 study questions will meet the customer demand for privacy protection. As is known to us, the privacy protection of customer is very important, No one wants to breach patient. So our HP0-Y37 actual exam pays high attention to protect the privacy of all customers. If you buy our study materials, you do not need to worry about privacy. On the other hand, we are glad to receive all your questions. If you have any questions about our HP0-Y37 study questions, you have the right to answer us in anytime. Our online workers will solve your problem immediately after receiving your questions. Because we hope that you can enjoy the best after-sales service. We believe that our HP0-Y37 preparation exam: Migrating &Troubleshooting Enterprise Networks will meet your all needs. Please give us a chance to service you; you will be satisfied with our study materials.

Keep making progress is a very good thing for all people. If you try your best to improve yourself continuously, you will that you will harvest a lot, including money, happiness and a good job and so on. The HP0-Y37 preparation exam: Migrating &Troubleshooting Enterprise Networks from our company will help you keep making progress. Choosing our study material, you will find that it will be very easy for you to overcome your shortcomings and become a persistent person. If you decide to buy our HP0-Y37 study questions, you can get the chance that you will pass your exam and get the certification successfully in a short time. In a word, if you want to achieve your dream and become the excellent people in the near future, please buy our HP0-Y37 actual exam, it will help you.

HP Migrating &Troubleshooting Enterprise Networks Sample Questions:

1. The Cisco network of a company has the following characteristics:

What happens within the network? (Select three.)

A) On routers on which the EIGRP distance is still at default values, only OSPF networks are visible in the IP routing table.
B) There is a disruption to network connectivity because EIGRP metrics and OSPF are very different and cannot produce the same path selection.
C) There is no disruption to network connectivity, although some routers using OSPF routes and some are using EIGRP routes because the network paths are the same.
D) On routers on which the EIGRP distance is 220, OSPF networks replace EIGRP networks in the IP routing table.
E) On routers on which the EIGRP distance is still at default values, only EIGRP networks are still visible in the IP routing table.
F) There is a temporary disruption as the routers transitioning to OSPF routes calculate paths that work in this hybrid environment.
G) On routers on which the EIGRP distance is 220, OSPF redistributed networks are not visible in the IP routing table.

2. You are connecting an HP A-Series switch to the edge of an existing Cisco LAN that is running RapidPVST+. Cisco distribution switches are the root and secondary root in all VLANs. The long pathcost method is enabled on all Cisco switches, and the cost of the ports between the distribution switches is set to 10000. Gigabit Ethernet uplinks are configured as dot1q trunks and all VLANs are permitted. You enable MSTP on the HP A-Series edge switch.What is the topology and Spanning Tree functionality? (Select two.)

A) The HP A-Series switch receives standard BPDUs in VLAN 1. The uplink connected to the root switch is the root port in the CIST. The other uplink port is blocked in VLAN 1 but forwarding in the other VLANs because the switch does not recognize the PVST+ BPDUs.
B) PVST+ BDPUs are not forwarded by the HP edge switch because one uplink is blocked.
C) HP A-Series edge switch receives standard BPDU in VLAN 1. The uplink connected to the root switch is root port, the other uplink port is not blocked.
D) HP A-Series edge switch receives standard BPDU in VLAN 1. The uplink connected to the root switch is root port, the other uplink port is blocked.
E) PVST+ BDPUs are forwarded by the HP edge switch because both uplinks are up.

3. Click the Exhibit button.

You are replacing your Cisco distribution layer switches with HP A-Series switches. The Cisco switches have a VLAN map applied to VLAN 21 (subnet 10.2.21.0/24). The following is a configuration for this VLAN map:

The exhibits display possible configurations for the HP A-Series switch. Which configuration controls traffic that arrives on VLAN 21 in the same way that the current Cisco switches do?

A) Exhibit 1
B) Exhibit 3
C) Exhibit 4
D) Exhibit 2

4. Click the Exhibit button.

The exhibit displays the basic steps in one migration process for replacing Cisco distribution layer switches with HP E-Series switches. You are attempting to complete the migration with as little downtime as possible. What must you do between Step 1 and Step 2?

A) Disable the Spanning Tree Protocol on Cisco switch 2.
B) Disable the Spanning Tree Protocol on the HP E-Series switch.
C) Disable all VLAN interfaces on Cisco switch 2.
D) Reconfigure Cisco switch 2 to be the HSRP active router in all VLANs.

5. In RRPP Ring 3 of an HP A-Series switch, the RRPP port status of the primary port is UP, but the port status of the secondary port is BLOCKED. What most likely caused this?

A) There is no Master in Ring 3.
B) The state of Ring 3 is fail.
C) The state of Ring 3 is complete.
D) The switch is misconfigured.
E) The state of Ring 3 is incomplete.
F) Spanning Tree is enabled on the secondary port.

Solutions: